CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ ANH NGHI SƠN
D3,KDC Miếu Nổi, Đường Đinh Tiên Hoàng, Q.Bình Thạnh,Tp.HCM
D3,KDC Miếu Nổi, Đường Đinh Tiên Hoàng, Q.Bình Thạnh,Tp.HCM
Quí khách có nhu cầu
vui lòng liên hệ:
Hotline: 0916 551 124 (@
Ms Duyên)
Yahoo: duyen_ans
Skype: duyen_ans
Chúng tôi chuyên cung cấp về các sản phẩm:
Sensors, Encoder, PLC, HMI, Instrument Measurement (CO,CO2, O2, pH, Temp, Humidity, Press,...)
Sensors, Encoder, PLC, HMI, Instrument Measurement (CO,CO2, O2, pH, Temp, Humidity, Press,...)
ANS xin hân hạnh giới
thiệu những sản phẩm mà chúng tôi hiện là nhà phân phối:
| 100% Italy Origin | CSF Vietnam | KMAE0 |
| PROGRESSIVE CAVITY PUMP | ||
| MAE 70-L/AA.ET32 | ||
| AISI 304 | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): THINNED MOLASSES | ||
| MAX TEMPERATURE: 70 °C OPERATION INFORMATION: | ||
| SUCTION: FROM CHAMBER | ||
| PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 5.3 m³/h | ||
| PRESSURE(1): 3 bar | ||
| RPM AT DUTY POINT(1): 200 Gir/Min | ||
| MOUNTING ARRANGEMENT: MONOBLOC | ||
| VERTICAL PORT: DN65 DIN 11851 MALE THREAD | ||
| HORIZONTAL PORT: DN65 DIN 11851 MALE THREAD PUMP MATERIAL: AISI 304-1.4301 | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| STATOR ELASTOMER: N.B.R. FOODGRADE NITRIL RUBBER STATOR TYPE: LONG PITCH | ||
| MECHANICAL SEAL TYPE INTERNAL MECHANICAL SEAL | ||
| CONTACT FACES: TUC/TUC-BRAZED | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: ROTEN 2+8 X7337+PIN(32) BI-DIRECT. | ||
| MOTORIZATION: | ||
| "MOTOVARIO" GEARBOX H061FM | ||
| GEAR RATIO= 7,33 | ||
| N2 (MIN-¹)4P= 194 | ||
| ELECTRIC MOTOR: "MULTIVOLTAGE" IE3-EISA IP55, CL.F MOTOR ROTATION SPEED: 1450 RPM(50HZ) | ||
| MOTOR POWER: 3KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) ±5% PTC THERMISTOR: PTC TYPE INCLUDED | ||
| COUPLING: | ||
| FIXED BASE: 300X1080 mm BASE/TROLLEY MATERIAL: MILD STEEL(PAINTED) SPECIAL EXECUTIONS: | ||
| + ROTOR REDUCED DIAMETER | ||
| (PC pump with flow rate of 5.3m3/h, working pressure of 3 Bar, temperature of about 700C) | ||
| 100% Italy Origin | CSF Vietnam | KMAE0 |
| PROGRESSIVE CAVITY PUMP | ||
| MAE 65-1/AA.ET32 | ||
| AISI 304 | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): THINNED MOLASSES | ||
| MAX TEMPERATURE: 70 °C OPERATION INFORMATION: | ||
| SUCTION: FROM CHAMBER | ||
| PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 3.6 m³/h | ||
| PRESSURE(1): 1 bar | ||
| RPM AT DUTY POINT(1): 260 Gir/Min | ||
| MOUNTING ARRANGEMENT: MONOBLOC | ||
| VERTICAL PORT: DN65 DIN 11851 MALE THREAD | ||
| HORIZONTAL PORT: DN65 DIN 11851 MALE THREAD PUMP MATERIAL: AISI 304-1.4301 | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| STATOR ELASTOMER: N.B.R. FOODGRADE NITRIL RUBBER STATOR TYPE: SINGLE STAGE | ||
| MECHANICAL SEAL TYPE INTERNAL MECHANICAL SEAL | ||
| CONTACT FACES: TUC/TUC-BRAZED | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: ROTEN 2+8 X7337+PIN(32) BI-DIRECT. | ||
| MOTORIZATION: | ||
| "MOTOVARIO" GEARBOX H061FM | ||
| GEAR RATIO= 5,25 | ||
| N2 (MIN-¹)4P= 270 | ||
| ELECTRIC MOTOR: "MULTIVOLTAGE" IE3-EISA IP55, CL.F MOTOR ROTATION SPEED: 1450 RPM(50HZ) | ||
| MOTOR POWER: 1.5KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) ±5% PTC THERMISTOR: PTC TYPE INCLUDED | ||
| COUPLING: | ||
| FIXED BASE: 300X920 mm BASE/TROLLEY MATERIAL: MILD STEEL(PAINTED) SPECIAL EXECUTIONS: | ||
| + ROTOR REDUCED DIAMETER | ||
| DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCIMO | ||
| SECTIONAL DRAWING WITH PART LIST DOCA3280 | ||
| (PC pump with flow rate of 60l/min, working pressure of 1 Bar, temperature of about 700C) | ||
| 100% Italy Origin | CSF Vietnam | KMAE0 |
| PROGRESSIVE CAVITY PUMP | ||
| MAE 50-1/AA.T32 | ||
| AISI 304 | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): THINNED MOLASSES | ||
| TEMPERATURE: AMBIENT OPERATION INFORMATION: | ||
| SUCTION: FROM CHAMBER | ||
| PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 1.2 m³/h | ||
| PRESSURE(1): 1 bar | ||
| RPM AT DUTY POINT(1): 250 Gir/Min | ||
| MOUNTING ARRANGEMENT: MONOBLOC | ||
| VERTICAL PORT: DN50 DIN 11851 MALE THREAD | ||
| HORIZONTAL PORT: DN50 DIN 11851 MALE THREAD PUMP MATERIAL: AISI 304-1.4301 | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| STATOR ELASTOMER: N.B.R. FOODGRADE NITRIL RUBBER STATOR TYPE: SINGLE STAGE | ||
| MECHANICAL SEAL TYPE INTERNAL MECHANICAL SEAL | ||
| CONTACT FACES: TUC/TUC-BRAZED | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: ROTEN 2+8 X7337+PIN(32) BI-DIRECT. | ||
| MOTORIZATION: | ||
| "MOTOVARIO" GEARBOX H051FM | ||
| GEAR RATIO= 5,82 | ||
| N2 (MIN-¹)4P= 243 | ||
| ELECTRIC MOTOR: "MULTIVOLTAGE" IE3-EISA IP55, CL.F MOTOR ROTATION SPEED: 1450 RPM(50HZ) | ||
| MOTOR POWER: 1.1KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) ±5% PTC THERMISTOR: PTC TYPE INCLUDED | ||
| COUPLING: | ||
| FIXED BASE: 300X920 mm | ||
| BASE/TROLLEY MATERIAL: MILD STEEL(PAINTED) | ||
| DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCIMO | ||
| SECTIONAL DRAWING WITH PART LIST DOCA2606 | ||
| (PC pump with flow rate of 20l/min, working pressure of 1 Bar, working at ambient temperature of about 700C) | ||
| 100% Italy Origin | CSF Vietnam | Model: TADGA0004 |
| (PUMP MAN 50-2/AA.T32 Statore M50-2 PERB SPP 841 Food Grade NBR Stator M50/2, NBR) | ||
| 100% Italy Origin | CSF Vietnam | PARTS FOR PUMP S/N C024481: |
| 100% Italy Origin | CSF Vietnam | 1R24D.03KZ7 |
| TEN.ROT3 X7X7KZ7 24DES | ||
| Composite | ||
| SNG SEAL R3 SC/CA/EPDM d.24R | ||
| 100% Italy Origin | CSF Vietnam | RAAGM8650F |
| O-RING 8650 EPDM-E70Q FDA-3A-USP | ||
| . 164,5X7 | ||
| EPDM / . O-RING 8650 FDA/3A/USP VI | ||
| 100% Italy Origin | CSF Vietnam | TADGA0008 |
| STATORE M80-1 MO991 (N1) | ||
| . FOOD GRADE | ||
| NBR SPP841 / NBR SPP841 | ||
| STATOR, M80/1 FOOD | ||
| (PUMP MAN80-1/AA.BT32 | ||
| PUMP MCN80-1 | ||
| Starore M80 PERB SPP841 | ||
| Food Grade | ||
| NBR | ||
| Stator M80/1, NBR) | ||
| 100% Italy Origin | CSF Vietnam | TACAA0007 |
| ROTORE M80-1 MO16 | ||
| AISI 304 / 1.4301(EN10088-1) | ||
| ROTOR, M80/1 | ||
| (ROTORE M80-1 304 | ||
| AISI 304 | ||
| Rotor M80/1 304) | ||
| 100% Italy Origin | CSF Vietnam | STATOR FOR PUMP S/N M030040 |
| TADGF0003 | ||
| STATORE M50-1 MO79 (N2) | ||
| . FOOD GRADE | ||
| NBR PRN823 CHIARO / NBR PRN823 CHIARO | ||
| STATOR, M50/1 WHITE-FOOD | ||
| (MAN-50-1-AF-T42-TRAK-50 SC.DX E2644/4 M50/1) | ||
| 100% Italy Origin | CSF Vietnam | 1U20PFRZ7S |
| PARTE FISSA UNIT2 Z7 D.20SR +SPINA | ||
| Composite | ||
| STAT. SEAL U2 CA/EPDM 20 Rif. 006 | ||
| 100% Italy Origin | CSF Vietnam | 1U20PR3.X7K |
| PARTE ROTAN.UNIT3 X7X7K 20DES | ||
| Composite | ||
| ROT. SEAL U3 SC/EPDM 20R Rif. 006 | ||
| 100% Italy Origin | CSF Vietnam | RAAGM8650F |
| O-RING 8650 EPDM-E70Q FDA-3A-USP | ||
| . 164,5X7 | ||
| EPDM / . | ||
| O-RING 8650 FDA/3A/USP VI Rif. 007 | ||
| 100% Italy Origin | CSF Pump Vietnam | KCS65 |
| CENTRIFUGAL PUMP | ||
| CS 65-210-2-20/BM.98MPT82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): MINERAL WATER | ||
| TEMPERATURE: AMBIENT | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 60 m³/h | ||
| TDH(1): 50 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: 3" SMS OUTLET PORT: 3" SMS | ||
| PUMP MATERIAL: AISI 316L-1.4409-CF3M PUMP ELASTOMERS: EPDM | ||
| IMPELLER: | ||
| OPEN, 6 BLADES REDUCED DIA. 198 mm MECHANICAL SEAL SINGLE INTERNAL MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: UNITEN 5 X7X7KZ7(82) ELECTRIC MOTOR: "MULTIVOLTAGE" IE2 IP55, CL.F ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 15 KW | ||
| MOTOR VOLTAGE: 400/690V D/Y(STD) ±5% PTC MOTOR THERMISTOR: PTC TYPE INCLUDED | ||
| (CENTRIFUGAL PUMP INCLUDE COVER | ||
| Flowrate: 60 m3/h @ Pressure: 5 bar | ||
| H = 8m, S = 261m | ||
| Connecting: SMS | ||
| Pipe connect to pump's inlet: 4 inch | ||
| Pipe connect to pump's outlet: 4 inch) | ||
| 100% Italy Origin | CSF Pump Vietnam | KCS65 |
| CENTRIFUGAL PUMP | ||
| CS 65-210-2-15/BM.83MPT82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): MINERAL WATER | ||
| TEMPERATURE: AMBIENT | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 60 m³/h | ||
| TDH(1): 40 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: 3" SMS OUTLET PORT: 3" SMS | ||
| PUMP MATERIAL: AISI 316L-1.4409-CF3M PUMP ELASTOMERS: EPDM | ||
| IMPELLER: | ||
| OPEN, 6 BLADES REDUCED DIA. 183 mm MECHANICAL SEAL SINGLE INTERNAL MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: UNITEN 5 X7X7KZ7(82) ELECTRIC MOTOR: "MULTIVOLTAGE" IE2 IP55, CL.F ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 11 KW | ||
| MOTOR VOLTAGE: 400/690V D/Y(STD) ±5% PTC MOTOR THERMISTOR: PTC TYPE | ||
| (CENTRIFUGAL PUMP INCLUDE COVER | ||
| Flowrate: 60 m3/h @ Pressure: 4 bar | ||
| H = 8m, S = 261m | ||
| Connecting: SMS | ||
| Pipe connect to pump's inlet: 3 inch | ||
| Pipe connect to pump's outlet: 3 inch) | ||
| 100% Italy Origin | CSF Vietnam | KCS50 |
| CENTRIFUGAL PUMP | ||
| CS 50-175-2-7.5/BM.63MPT82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): MINERAL WATER | ||
| TEMPERATURE: AMBIENT | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 40 m³/h | ||
| TDH(1): 30 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: 2,5" SMS OUTLET PORT: 2" SMS | ||
| PUMP MATERIAL: AISI 316L-1.4409-CF3M PUMP ELASTOMERS: EPDM | ||
| IMPELLER: | ||
| OPEN, 6 BLADES REDUCED DIA. 163 mm MECHANICAL SEAL SINGLE INTERNAL MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: UNITEN 3 X7X7KZ7(82) ELECTRIC MOTOR: "MULTIVOLTAGE" IE2 IP55, CL.F ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 5.5 KW | ||
| MOTOR VOLTAGE: 400/690V D/Y(STD) ±5% | ||
| (CENTRIFUGAL PUMP INCLUDE COVER | ||
| Flowrate: 40 m3/h @ Pressure: 3 bar | ||
| H = 8m, S = 50m | ||
| Connecting: SMS | ||
| Pipe connect to pump's inlet: 3 inch | ||
| Pipe connect to pump's outlet: 3 inch | ||
| Pipe connect to pump's inlet: 2 inch | ||
| Pipe connect to pump's outlet: 2 inch) | ||
| 100% Italy Origin | CSF Vietnam | KCS25 |
| CENTRIFUGAL PUMP | ||
| CS 25-145-2-2/BA.PZW82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): ETHYL ALCOHOL (ETHANOL) | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 4 m³/h | ||
| TDH(1): 30 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: DN32 DIN11851 MALE THREAD OUTLET PORT: DN25 DIN11851 MALE THREAD PUMP MATERIAL: AISI 316L-1.4409-CF3M | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER IMPELLER: | ||
| OPEN, 6 BLADES Ø FULL 145 | ||
| MECHANICAL SEAL INTERNAL FORCED CIRCULATION MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| CSF CODE: UNITEN 3 X6X6KZ6(82) ELECTRIC MOTOR: "RAEL" IP55, CLASS F(ATEX) ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 1.5 KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) | ||
| DECLARAT.(ATEX 94/9/EC): | ||
| EX II 2G C T3 DOC.C.CE DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCICS | ||
| 100% Italy Origin | CSF Vietnam | KCS32 |
| CENTRIFUGAL PUMP | ||
| CS 32-145-2-3/BA.PZW82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): ETHYL ALCOHOL (ETHANOL) | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 6 m³/h | ||
| TDH(1): 30 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: DN40 DIN11851 MALE THREAD OUTLET PORT: DN32 DIN11851 MALE THREAD PUMP MATERIAL: AISI 316L-1.4409-CF3M | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER IMPELLER: | ||
| OPEN, 6 BLADES Ø FULL 145 | ||
| MECHANICAL SEAL INTERNAL FORCED CIRCULATION MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| CSF CODE: UNITEN 3 X6X6KZ6(82) ELECTRIC MOTOR: "RAEL" IP55, CLASS F(ATEX) ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 2.2 KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) | ||
| DECLARAT.(ATEX 94/9/EC): | ||
| EX II 2G C T3 DOC.C.CE DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCICS | ||
| 100% Italy Origin | CSF Vietnam | KCS25 |
| CENTRIFUGAL PUMP | ||
| CS 25-145-2-1/BA.PZW82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): ETHYL ALCOHOL (ETHANOL) | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 0.5 m³/h | ||
| TDH(1): 30 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: DN32 DIN11851 MALE THREAD OUTLET PORT: DN25 DIN11851 MALE THREAD PUMP MATERIAL: AISI 316L-1.4409-CF3M | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER IMPELLER: | ||
| OPEN, 6 BLADES Ø FULL 145 | ||
| MECHANICAL SEAL INTERNAL FORCED CIRCULATION MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| CSF CODE: UNITEN 3 X6X6KZ6(82) ELECTRIC MOTOR: "RAEL" IP55, CLASS F(ATEX) ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 0.75 KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) | ||
| DECLARAT.(ATEX 94/9/EC): | ||
| EX II 2G C T3 DOC.C.CE DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCICS | ||
| 100% Italy Origin | CSF Vietnam | KCS25 |
| CENTRIFUGAL PUMP | ||
| CS 25-145-2-1.5/BA.PZW82 | ||
| AISI 316L | ||
| TECHNICAL FEATURES PRODUCT INFORMATION: | ||
| PRODUCT NAME(1): ETHYL ALCOHOL (ETHANOL) | ||
| SG/DENSITY: 1 Kg/dm³ | ||
| VISCOSITY: 1 cP OPERATION INFORMATION: | ||
| INLET/SUCTION PRESSURE: FLOODED PERFORMANCES REQUIRED: | ||
| FLOW RATE(1): 1 m³/h | ||
| TDH(1): 30 m | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+ADJUSTABLE FEET MOTOR SHROUD: INCLUDED | ||
| INLET PORT: DN32 DIN11851 MALE THREAD OUTLET PORT: DN25 DIN11851 MALE THREAD PUMP MATERIAL: AISI 316L-1.4409-CF3M | ||
| PUMP ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER IMPELLER: | ||
| OPEN, 6 BLADES Ø FULL 145 | ||
| MECHANICAL SEAL INTERNAL FORCED CIRCULATION MECHANICAL SEAL TYPE | ||
| FACES IN CONTACT: SIC/CARBON | ||
| ELASTOMERS: N.B.R. FOODGRADE NITRIL RUBBER | ||
| CSF CODE: UNITEN 3 X6X6KZ6(82) ELECTRIC MOTOR: "RAEL" IP55, CLASS F(ATEX) ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 1.1 KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) | ||
| DECLARAT.(ATEX 94/9/EC): | ||
| EX II 2G C T3 DOC.C.CE DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCICS | ||
| 100% Italy Origin | CSF Vietnam | KCC41 |
| CENTRIFUGAL PUMP | ||
| CLC 41-2-1.5/BM.NPT82 | ||
| AISI 316 | ||
| TECHNICAL FEATURES | ||
| MOUNTING ARRANGEMENT: WITH MOTOR+FEET | ||
| MOTOR SHROUD: INCLUDED | ||
| INLET PORT: 1,5" T-CLAMP | ||
| OUTLET PORT: 1" T-CLAMP | ||
| PUMP MATERIAL: AISI 316-1.4401-CF8M PUMP ELASTOMERS: EPDM | ||
| IMPELLER: | ||
| FULL CLOSED: ø 156 | ||
| MECHANICAL SEAL SINGLE INTERNAL | ||
| MECHANICAL SEAL TYPE: | ||
| CONTACT FACES: SIC/CARBON | ||
| ELASTOMERS: EPDM | ||
| CSF CODE: UNITEN 3 X7X7KZ7(82) | ||
| ELECTRIC MOTOR: "WEG" IE2 IP55 CL.F | ||
| ROTATION SPEED: 2900 RPM(50HZ) | ||
| MOTOR POWER: 1.1 KW | ||
| MOTOR VOLTAGE: 230/400V D/Y(STD) ±5% | ||
| DOCUMENTS ATTACHED: | ||
| INSTRUCTIONS FOR INSTALLATION DOCICL | ||
| SECTIONAL DRAWING WITH PART LIST DOCA3088 | ||
| NOTE(2): | ||
| ----------------->NB: Pompa come matricola:C024481 | ||
| (Model Pump: CLC-2-1.5/a.KT82 | ||
| Serial: 24481) | ||
| 100% Italy Origin | C.S.F Vietnam | SPARE PARTS FOR PUMP: |
| CS 80-210-2-15/BM.65PWH6 S/N C070914: | ||
| (Mechanical Seal for Model: CS80-210-2-15/BM.B5PWHB Serial: C070914) | ||
| 100% Italy Origin | C.S.F Vietnam | 1U43D.EHC3Z7 |
| TENUTA UNIT.EHC X73Z7.X77 43DES+SPINA | ||
| Composite | ||
| SNG SEAL EHC TCB/CA/EPDM d.43R, SLOT Rif. 007 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM6795F |
| O-RING 6795 EPDM-E70Q FDA-3A-USP | ||
| . 202,56 X 5,34 | ||
| EPDM | ||
| O-RING 6795 FDA/3A/USP VI Rif. 018 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM2150F |
| O-RING 2150 EPDM-E70Q FDA-3A-USP | ||
| . D.37,82 X 1,78 | ||
| EPDM / . | ||
| O-RING 2150 FDA/3A/USP VI Rif. 062 | ||
| 100% Italy Origin | C.S.F Vietnam | SPARE PARTS FOR PUMP: |
| CS 65-145-2-10/BM.PW82 S/N C070993 | ||
| CS 65-145-2-10/BM.PW82 S/N C071142: | ||
| (Mechanical Seal for Model: CS65-145-2-10/BM.PW82 Serial: CC070993 | ||
| Mechanical Seal for Model: CS65-145-2-10/BM.PW82 Serial: C071142) | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM215F |
| O-RING 215 EPDM-E70Q FDA-3A-USP | ||
| 139,7 X 5,34 | ||
| EPDM / . | ||
| O-RING 215 FDA/3A/USP VI Rif. 018 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM2112F |
| O-RING 2112 EPDM-E70Q FDA-3A-USP | ||
| . 28,3X1,78 | ||
| EPDM / . | ||
| O-RING 2112 FDA/3A/USP VI Rif. 062 | ||
| 100% Italy Origin | C.S.F Vietnam | 1U28D.03KZ7 |
| TEN.UNIT3 X7X7KZ7 28DES. CL | ||
| Composite | ||
| SNG SEAL U3 SC/CA/EPDM d.28R, SLOT | ||
| 100% Italy Origin | C.S.F Vietnam | SPARE PARTS FOR PUMP: |
| CS 40-260-2-25/BM.40PW64 S/N C070859: | ||
| (CS40-260-2-25/BM.40PW64 C070859) | ||
| 100% Italy Origin | C.S.F Vietnam | 1U43D.2HK37 |
| TEN.UNIT.2H XX7DK37 43DES | ||
| Composite | ||
| SNG SEAL U2H SC/TCB/EPDM d.43R | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM6995F |
| O-RING 6995 EPDM-E70Q FDA-3A-USP | ||
| . 253,36X5,34 | ||
| EPDM | ||
| O-RING 6995 FDA/3A/USP VI Rif. 018 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM2150F |
| O-RING 2150 EPDM-E70Q FDA-3A-USP | ||
| . D.37,82 X 1,78 | ||
| EPDM / . | ||
| O-RING 2150 FDA/3A/USP VI Rif. 062 | ||
| 100% Italy Origin | C.S.F Vietnam | SPARE PARTS FOR PUMP: |
| CS 50-260-2-25/BM.49PWH6 S/N C070915: | ||
| (Model: CS60-260-2-25/BM.49PWP6 C070915) | ||
| 100% Italy Origin | C.S.F Vietnam | 1U43D.EHC3Z7 |
| TENUTA UNIT.EHC X73Z7.X77 43DES+SPINA | ||
| Composite | ||
| SNG SEAL EHC TCB/CA/EPDM d.43R, SLOT Rif. 007 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM6995F |
| O-RING 6995 EPDM-E70Q FDA-3A-USP | ||
| . 253,36X5,34 | ||
| EPDM | ||
| O-RING 6995 FDA/3A/USP VI Rif. 018 | ||
| 100% Italy Origin | C.S.F Vietnam | RAAGM2150F |
| O-RING 2150 EPDM-E70Q FDA-3A-USP | ||
| . D.37,82 X 1,78 | ||
| EPDM / . | ||
| O-RING 2150 FDA/3A/USP VI Rif. 062 |
Liên hệ: Ms
Duyên – 0916551124
ANS Vietnam là một trong những Công ty hàng đầu chuyên
cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều
khiển tự động của các hãng nổi tiếng :.. Bei Encoder Vietnam , Crouzet Vietnam, Celduc Vietnam,
Epulse Vietnam,
Crydom Vietnam, Raytek Vietnam, Ircon Vietnam , MTS Vietnam, Pilz Vietnam, Status Vietnam, newall vietnam, sterilair
vietnam, Univer Vietnam ,Masibus Vietnam,
Setra Vietnam, elap encoder
vietnam, Flowmeters Vietnam, Conch Vietnam,
Unipulse vietnam, Divus Vietnam, Novotechnik
Vietnam, Vaisala Vietnam, MTS Sensor, Balluff sensor, Gems sensor Vietnam, Microsonic
Vietnam, Proxitron Vietnam, Posital Vietnam,
Bernstein Vietnam, Banico Controls
Vietnam...
HÂN HẠNH PHỤC VỤ QUÝ
KHÁCH!
